Помощь
Добавить в избранное
Музыка Dj Mixes Альбомы Видеоклипы Топ Радио Радиостанции Видео приколы Flash-игры
Музыка пользователей Моя музыка Личный кабинет Моя страница Поиск Пользователи Форум Форум

   Сообщения за день
Вернуться   Bisound.com - Музыкальный портал > РАЗНОЕ

Ответ
 
Опции темы
  #1  
Старый 28.12.2022, 05:43
Margo25 Margo25 вне форума
Собеседник
 
Регистрация: 25.05.2020
Сообщений: 168
По умолчанию амтоматика для котлов

Всем привет. Нужна автоматика для котлов, где можно купить?
Ответить с цитированием
  #2  
Старый 28.12.2022, 05:45
Аватар для Sasha26
Sasha26 Sasha26 вне форума
Собеседник
 
Регистрация: 18.01.2020
Сообщений: 177
По умолчанию

Я недавно на даче установила новую автоматику для котла отопления. Заказывала её на сайте магазина Аквапоинт https://www.aquapoint.ru/kotly-otopl...a-dlya-kotlov/ По цене меня всё устроило, доставили быстро, качество просто отличное.
Ответить с цитированием
  #3  
Старый 07.04.2023, 10:13
GoldFire1988 GoldFire1988 вне форума
Собеседник
 
Регистрация: 23.04.2013
Сообщений: 755
По умолчанию

Цитата:
Сообщение от Margo25 Посмотреть сообщение
Всем привет. Нужна автоматика для котлов, где можно купить?
Смотря какая автоматика нужна. Чтобы при скачках напряжения отключалось питание?
Ответить с цитированием
  #4  
Старый 07.04.2023, 10:25
baseroli baseroli вне форума
Активный пользователь
 
Регистрация: 07.05.2013
Сообщений: 1,146
По умолчанию

Цитата:
Сообщение от GoldFire1988 Посмотреть сообщение
Смотря какая автоматика нужна. Чтобы при скачках напряжения отключалось питание?
Верно, данные автоматические выключатели должны обязательно быть установлены, чтобы оборудование не испортилось при скачках напряжения. Заказать их сможете вот тут https://e7000.ru/catalog/vyklyuchate...skiy-modulnyy/ , у поставщика "Товарищ Токов". Там уж сами подберите по подходящие по технических характеристикам. Сделать это не сложно так как всё описание товара приведено.
Ответить с цитированием
  #5  
Старый 07.04.2023, 13:47
rkmechanical rkmechanical вне форума
Новичок
 
Регистрация: 07.04.2023
Сообщений: 1
По умолчанию

CNC Machine Parts
The fundamental elements of the CNC machine are shown by the following components:
The Input Device
They are the tools used to input part-programming data into the CNC machine. Three kinds that are input tools are commonly employed for input: magnetic tape readers computer readers and punch tapes that are connected to the RS-232-C.
Machine Control Unit
It is the CNC's central brain that's now in operation. The MCU performs all of the CNC machine's operations of controlling. It decodes and finishes the instructions provided and reads them out among the various tasks. The instruction encoded is then decoded by it. This axis makes use of interpolation (linear or spherical), as well as the helical) to generate motion commands.
It provides an amplifier circuit that powers the spindle mechanism using the speed order of the axis. Each driving axis it receives feedback signals to indicate the position and speed. It can also be equipped with additional control functions like tool changes coolant, spindle off/on.
Also Read: Stabilitrak Repair Cost
Machine Tools
To control speed and position A CNC machine comes with a table that slides and spindle. The X, Y as well as Z tools are utilized to control the tables, and the Z-axis is used for controlling the spindle.
The Drive System
Ball drive motors, the lead screws, as well as the amplifier circuit form the CNC machine's driving circuit. The MCU supplies the amplifier circuit with the information (i.e. location, position, along with speed) from every Axis.
The drive motors then get switched on by amplifying control signals. In order to move the table, the driven motors are triggered to turn the screw that leads to the ball.
Feedback Mechanism
Transducers, that act as sensors within this system are employed. Another term for it is an instrumentation system. It is comprised of motion and position transducers that continuously track the location and movements of cutting tools.
The MCU receives signals from these transducers, and produces control signals to rectify motion and location errors using a comparison of reference signals with responses signals and then comparing response signals with the reference signals.
Display Unit
Instructions, programs along with other vital details about the CNC machine are displayed on a display.
Bed
In CNC machine, the bed parts are the ones that carry the entire machine's weight and require the installation of other components. Because the tool turret on CNC lathes travels across them, the bed component is made of stronger materials such as cast iron.
Also Read: Electrical Phases
Headstock
Because the workpieces are fixed by the headstock it's one of the most important components in CNC lathes. The main axle in the CNC lathe is powered by motors.
The Tailstock
When CNC machines are used for tasks such as threading, noodling, or turning, this machine gives the workpiece greater grip. On the end of the workpiece there is support.
Tailstock Quill
Due to the tailstock quill workpieces are evenly distributed between the headstock as well as the tailstock.
Pedal or a Footswitch
The tailstock quill moves to reverse and forward position, for example using the pedal used to shut and open the chuck, while trying to grasp the part.
Chuck
Since the chuck is placed at the center of the axle and the tool is able to adjust.
The Control Panel
Control panels are the primary elements of CNC machines. They're used to control or feed the programs to allow the work to be performed to the parts. They are often called"the CNC machines brain.
Advantages of CNC Machining
CNC machines aid manufacturers to increase efficiency and precision and reduce the chance of human error, by enabling them to automatize various manufacturing processes that normally have to be done manually.
Here are five ways in which they have impacted engineering:
CNC Machining Is Excellent For Producing Lots Of Parts
If you have to make more mechanical parts in greater quantity (from to the top double-digits through into the 100s), CNC is likely to be the most economical alternative since it's more affordable to utilize CNC manufacturing as opposed to 3D printing.
Also Read: How Much Does It Cost to Fix a Coolant Leak
Ответить с цитированием
Ответ


Опции темы

Ваши права в разделе
Вы не можете создавать темы
Вы не можете отвечать на сообщения
Вы не можете прикреплять файлы
Вы не можете редактировать сообщения

BB коды Вкл.
Смайлы Вкл.
[IMG] код Вкл.
HTML код Выкл.
Быстрый переход


Музыка Dj mixes Альбомы Видеоклипы Каталог файлов Радио Видео приколы Flash-игры
Все права защищены © 2007-2024 Bisound.com Rambler's Top100